Company Blog
High quality high performance excellent service
Search productSearch post
High quality high performance excellent service
Most backup power conversations start in the wrong place. Someone picks a battery because the capacity number looks right, and six months later the fixture fails its annual inspection, or the UPS beeps and dies in eleven minutes instead of thirty. The capacity number was never the problem. The problem was that nobody asked what the battery actually has to do during an outage, and for how long, and in what temperature, and who signs off on all of it.
This article walks through backup power design for three kinds of equipment that live or die by their batteries: LED emergency lighting, dedicated emergency luminaires and exit signs, and small UPS units. We will cover what the codes ask for, how to size a pack with real math instead of guesswork, where the 21700 battery format fits and where it doesn’t, what good battery pack assembly looks like from the outside, and when a private label arrangement makes sense for a distributor or channel brand. There’s also a section on smart home devices, because that market keeps showing up on the same quotation sheets.
If your equipment is emergency lighting for a commercial building in North America, the battery is not really your decision to make freely. The building codes have already decided most of it for you.
NFPA 101, the Life Safety Code, requires emergency lighting along means of egress to run on battery or generator backup for a minimum of 90 minutes after normal power is lost. Illumination has to come back within 10 seconds of the outage. The equipment itself must be listed to UL 924, the standard for emergency lighting and power equipment, by a nationally recognized testing laboratory. And the system gets tested on a schedule: a 30-second functional test every month, and a full 90-minute discharge test once a year, with records kept. Failing the annual test is the classic way a building finds out its backup batteries were dead all along.
UL 924 also sets performance expectations that shape battery selection upstream. The battery must recharge so the unit is ready for another outage within about a day, and it must hold up across the temperature range of the installation environment. Stairwells get hot in summer and cold in winter. Equipment mounted outdoors or in parking structures sees worse.
What does this mean for you as an equipment designer or buyer? Three things:
For small UPS equipment the code pressure is lighter, but the customer expectation isn’t. A UPS that silently loses capacity over two years on float charge is a support ticket waiting to happen, and the buyer of a UPS is exactly the kind of person who tests it.
Let’s do the arithmetic once, properly, so you can reuse the method.
Suppose you’re building an LED emergency driver that must hold a 10 W LED load at reduced output for 90 minutes, per the code minimum.
Step 1: energy at the load. 10 W × 1.5 h = 15 Wh. That’s what the LED needs.
Step 2: add the conversion chain. The battery doesn’t feed the LED directly. There’s a driver, an inverter or boost stage, wiring losses, and the BMS. At this scale, 80–85% end-to-end efficiency is realistic. 15 Wh ÷ 0.82 ≈ 18.3 Wh at the battery terminals.
Step 3: derate for reality. The battery must still deliver at end of life, at the low end of its temperature range, after years on float charge. Lithium cells typically age to 80% of rated capacity in service, and cold knocks another chunk off. A combined derating factor of 0.7 is a defensible starting point for a code-driven application. 18.3 Wh ÷ 0.7 ≈ 26 Wh of rated capacity.
Step 4: pick the configuration. If the driver runs from a 10.8–12.6 V rail, a 3S lithium-ion pack (11.1 V nominal) works: 26 Wh ÷ 11.1 V ≈ 2,350 mAh. A single 21700 cell is 5,000 mAh at 3.7 V — roughly the right energy per cell, so you’d either run 3 cells in series or reconfigure the electronics. If the driver tolerates a wide input, a 1S high-capacity cell with a boost stage is cheaper and simpler.
| Parameter | Value in this example | Note |
|---|---|---|
| Emergency load | 10 W LED | Reduced-output emergency mode |
| Required duration | 90 minutes | NFPA 101 minimum; some specs ask for 120 |
| Energy at load | 15 Wh | Load × time |
| Energy at battery | ≈18.3 Wh | After conversion losses |
| Rated capacity needed | ≈26 Wh | After end-of-life and temperature derating |
| Pack example | 3S2P 21700, 11.1 V 5,000–10,000 mAh | Headroom for a higher-output variant |
One habit worth building: size to the annual test, not to the datasheet. The pack that passes year one and fails year three wasn’t undersized on paper — it was undersized against its own aging curve. Every watt-hour of margin you add in step 3 buys you years at the end of service life.
The 21700 battery format — 21 mm diameter, 70 mm long — has quietly become the default cell for mid-size backup applications, and for good reasons that have nothing to do with fashion.
First, energy per cell. Modern 21700 cells run up to around 5,000 mAh at 3.7 V nominal, which is roughly 18–19 Wh in a single can. Compared to the older 18650 format, you get 40–50% more capacity per cell, which means fewer weld points, fewer cells to buy and match, a smaller BMS, and fewer things in the pack that can fail. For an emergency luminaire or a compact UPS where the battery lives in a housing designed a decade ago for a lead-acid brick, that density is the difference between fitting and not fitting.
Second, supply chain maturity. 21700 cells are produced at enormous scale for e-mobility and power tools, which means stable supply, competitive pricing, and multiple qualified manufacturers. When your product has a ten-year service life, cell availability five years from now is a real procurement question, and the 21700 answer is reassuring.
Third, the format is versatile across chemistries. The same footprint exists in high-energy NMC and in LiFePO4 variants, and KBT supplies both from its 21700 cylindrical cell line. If you want to see what’s available, the 21700 cylindrical rechargeable lithium-ion and LiFePO4 battery cells page lists the current options.
Where does the 21700 battery not fit? Two places, mainly. Very large UPS systems and energy storage cabinets usually move to large-format LiFePO4 prismatic cells or rack modules — see KBT’s large-capacity LiFePO4 energy storage batteries for that end of the range. And extremely slim devices, like thin emergency exit signs or flat-panel luminaires, need pouch cells instead, because a cylinder is a cylinder no matter how good it is. Chemistry choice follows the duty cycle: NMC/Li-ion for energy density in confined housings, LiFePO4 where cycle life, thermal stability, and long float service outweigh size.
A practical note on matching: for packs with cells in parallel, buy matched cells from one production lot where possible, and insist that your supplier documents the matching criteria (capacity, internal resistance, voltage at rest). Mismatched parallel strings age unevenly, and the weak cell drags the pack into early failure — exactly the failure mode the annual 90-minute test is designed to catch.
Two packs can carry the same cells and the same spec sheet and still have completely different service lives. The difference is almost always in the battery pack assembly — the part of the process that never shows up on a quotation line item.
Here’s what to look at when you evaluate a pack supplier’s assembly capability:
KBT’s own description of its business is worth quoting here, because it maps to this list: the company combines battery pack engineering, assembly and testing with cell manufacturing resources — which means the cells and the assembly are under one engineering conversation instead of two. You can read how they position it on the about page, and it’s a fair checklist for evaluating any supplier, including their competitors.
If you take one thing from this section, take this: when you compare quotes, ask each supplier to describe their assembly process for your specific pack, in writing. The one who can answer in specifics — weld parameters, BMS part number, test report format — is the one whose packs will still be passing the annual test in year five.
Distributors and channel brands in lighting and power equipment often reach this decision point: sell someone else’s branded pack, or put your own brand on the product. Private label lithium battery packs are the middle path — the supplier manufactures and assembles the pack, and it ships with your branding, your packaging, your part numbers.
When does it make sense? Usually when three things are true. You have ongoing volume, not a one-off project. You have customers who ask for your brand on the replacement part (which is exactly the situation in emergency lighting replacement batteries and UPS replacement packs — facility managers buy the brand on the fixture). And you’d rather spend your capital on channel and service than on a factory.
If you go this route, a few things deserve attention before you sign anything:
Private label is a good arrangement when the supplier is good. It’s a brand-damaging arrangement when the supplier is mediocre and your logo is the one on the failure. Choose accordingly, and let the assembly-quality questions from the previous section do the choosing.
Battery backup conversations rarely stay within commercial lighting. The same distributors who quote emergency drivers get asked about residential products, and the most common crossover is a battery pack for smart home devices — hubs and gateways, smart locks, routers and mesh nodes, security sensors, and the small UPS-class units people now keep under their desks.
The requirements rhyme with commercial backup power, at smaller scale. A battery pack for smart home devices has a different job description than an emergency luminaire’s: a hub that bridges a lock, sensors, and cameras should ride through a utility outage for a few hours, not 90 minutes — long enough for the homeowner to notice, check the camera, and not lose the automation state. That’s typically a 2,000–5,200 mAh class lithium-ion pack with a simple BMS and a DC output connector, specified less by code and more by product marketing (“keeps your home secure for up to 8 hours during an outage”).
What changes at this scale:
An example of this class in KBT’s catalog: the 11.1 V 5,200 mAh pack with DC5521 output and a 12 V charger, built for CCTV and LED lighting — a bridge-power pack for security and lighting equipment with the BMS and charger supplied as a matched set. And for larger residential backup, the 12 V lithium-ion pack with cable family covers the higher-drain end. The engineering logic doesn’t change from the commercial side; only the numbers do. Which is, honestly, the point of designing it well the first time.
Whatever the application — emergency luminaire, UPS, or smart home bridge power — the document set you should expect from a pack supplier is similar:
And one boundary to keep straight, because it’s the most expensive misunderstanding in this market: battery documents are not equipment approval. A pack with a full IEC 62133 file and a clean UN 38.3 summary is a well-documented component. The UL 924 listing of an emergency luminaire, or the safety approval of a UPS, is evaluated at the finished equipment level, with the battery installed, by the equipment manufacturer. If you buy packs for equipment you certify, plan the re-evaluation whenever the battery changes. If you buy finished fixtures, ask the fixture maker — not the pack supplier — about the listing.
Electrically, often yes — a 3S lithium pack approximates a 6 V or 12 V lead-acid rail, and the energy density gain is dramatic. But the fixture was listed with the original battery configuration. Replacing it changes the input characteristics, the charging circuit load, and possibly the emergency driver behavior, which puts the listing into question. Lithium conversions of code-governed equipment should go through the fixture manufacturer or a re-listing process, not through a swap on a ladder.
Plan around 3–5 years of useful float service for lithium-ion in typical indoor conditions, with LiFePO4 often extending beyond that in favorable temperatures. The practical guidance: build the derating from the sizing example into the pack from day one, and budget replacement on a schedule rather than waiting for the annual test to find the failures one unit at a time.
Custom-packaged private label orders generally carry higher MOQs than standard models because of tooling, label setup, and packaging. KBT’s published structure supports small-batch MOQ on customization projects so a brand can validate demand first — if your volume is genuinely small, starting with a standard model under their brand and moving to private label once volumes justify it is usually the cheaper path.
Backup power is one of those product categories where the buyer hopes never to see the product work. That’s exactly why the engineering has to be unglamorous and a little pessimistic — sized for end of life, tested on a schedule, documented well enough that the inspector’s clipboard comes back clean. If you’re specifying a pack for LED emergency equipment, UPS units, or anything else that has to be there during an outage, you can contact KBT with the load, the duration, and the market, and have the configuration and its documents confirmed before you commit to a design.
A battery can pass a capacity test and still fail inside the customer's equipment. It may shut down when a motor starts, heat at the connector, refuse to charge, or work on the bench but fail after vibration and moisture exposure. These are not al...
View detailsTags: OEM battery sourcing, custom lithium battery packs, battery procurement, cylindrical cells Total body word count: 1,537 Reading time: 8 minutes Choosing an OEM battery manufacturer is a product-risk decision, not simply a search for ...
View detailsLearn how to specify a custom lithium battery pack for OEM projects, including voltage, capacity, BMS, connectors, cell type, UN38.3, MSDS, UL and CE.
View detailsCategory: Custom Battery Packs · About 1,700 words · 9 min read Industrial inspection tools and DIY electronics live in the same planning zone: the product needs a battery the market doesn't sell off the shelf, and the builder has to get it right ...
View details